SoftFoamU

FLOATING TIMBER FLOORS


FLOATING TIMBER FLOORS

Thermotec Softfoam U

LDPE foam underlay, 2mm thick applied over concrete, under floating timber or laminate floors. Apply PP tape to butt joins. Return edges at wall to isolate floor from walls. 50m x 1m x 2mm rolls. Field test result IIC 52 (Ln,r,w: 58dB).


HARD SURFACE FLOORS

(Flat areas- eg Kitchens, Family , Dining rooms)

HARD SURFACE FLOORS

Thermotec T65CFC Impact Panels

10mm thick glued to concrete using moisture cured PU adhesive. Apply 40mm edge strip of 5mm LDPE foam to walls. Allow “business card thickness” gap between panels when setting out and use resilient adhesives to adhere floor coverings such as tiles, or parquetry. 1200mm x 900mm x 10mm panels. Field test result Ln,r,w: 54 dB.


HARD SURFACE FLOORS

(Wet areas or with falls to waste-eg Bathrooms, Laundries.)

Thermotec Impact Foam 5mm

Applied to concrete plain or with self adhesive backing over waterproof membrane (Refer to AS 3740: Waterproofing of wet areas within residential buildings). Return edge strip of foam to walls to isolate mortar bed from adjoining walls. 50m x 1m x 5mm rolls Field Test Result IIC 64. (Ln,r,w: 46dB)